Title: https://staging3.smarterbusinessprocesses.com/test/
Last modified: July 27, 2023

---

# https://staging3.smarterbusinessprocesses.com/test/

 *  Resolved [MikepFive](https://wordpress.org/support/users/mikepfive/)
 * (@mikepfive)
 * [2 years, 10 months ago](https://wordpress.org/support/topic/https-staging3-smarterbusinessprocesses-com-test/)
 * I’ve just started ‘testing’ the plugin on a staging site I’ve created for the
   purpose.
 * I created a pretty simple Block Pattern, saved it and then used it on a Test 
   page: [https://staging3.smarterbusinessprocesses.com/test/](https://staging3.smarterbusinessprocesses.com/test/)
 * Worked fine
 * But when I go back to edit the Block Pattern I get is the message “The editor
   has encountered an unexpected error.” whenever I try to change anything.
 * Output from the Error Message buttons is presented below.
 * I’m keen to understand the potential cause of the problem before I consider implementing
   the plugin on the live site.
 * Grateful to receive any advice you may have on how to go about this
 * Regards,
 * Mike
 * ———
 * Error Text:
 * Error: Failed to execute ‘removeChild’ on ‘Node’: The node to be removed is not
   a child of this node.
   at jr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:75178](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:75178))
   at qr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76430](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76430))
   at Kr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76892](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76892))
   at qr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580))
   at Kr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76892](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76892))
   at qr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580))
   at Kr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76695](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76695))
   at qr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580))
   at Kr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76892](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76892))
   at qr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580))
 * ———
 * Post Text:
 *     ```wp-block-code
        <! -- wp:stackable/columns {"uniqueId":"31b5dbb","align":"full","innerBlockContentAlign":"alignfull"} -->
       <div class="wp-block-stackable-columns alignfull stk-block-columns stk-block stk-31b5dbb" data-block-id="31b5dbb"><div class="stk-row stk-inner-blocks stk-block-content stk-content-align stk-31b5dbb-column alignfull"><!-- wp:stackable/column {"uniqueId":"256570d"} -->
       <div class="wp-block-stackable-column stk-block-column stk-column stk-block stk-256570d" data-v="4" data-block-id="256570d"><div class="stk-column-wrapper stk-block-column__content stk-container stk-256570d-container stk--no-background stk--no-padding"><div class="stk-block-content stk-inner-blocks stk-256570d-inner-blocks"><!-- wp:stackable/columns {"uniqueId":"809c4ec"} -->
       <div class="wp-block-stackable-columns stk-block-columns stk-block stk-809c4ec" data-block-id="809c4ec"><div class="stk-row stk-inner-blocks stk-block-content stk-content-align stk-809c4ec-column"><!-- wp:stackable/column {"uniqueId":"066b706","columnWidth":10,"columnAdjacentCount":3,"hideTablet":true,"hideMobile":true} -->
       <div class="wp-block-stackable-column stk-block-column stk-column stk--hide-tablet stk--hide-mobile stk-block stk-066b706" data-v="4" data-block-id="066b706"><style>@media screen and (min-width:768px){.stk-066b706{flex:1 1 calc(10% - var(--stk-column-gap,0px) * 2 / 3 ) !important}}</style><div class="stk-column-wrapper stk-block-column__content stk-container stk-066b706-container stk--no-background stk--no-padding"><div class="stk-block-content stk-inner-blocks stk-066b706-inner-blocks"><!-- wp:paragraph -->
       <p></p>
       <!-- /wp:paragraph --></div></div></div>
       <!-- /wp:stackable/column -->
   
       <!-- wp:stackable/column {"uniqueId":"742764f","columnWidth":80,"columnAdjacentCount":3} -->
       <div class="wp-block-stackable-column stk-block-column stk-column stk-block stk-742764f" data-v="4" data-block-id="742764f"><style>@media screen and (min-width:768px){.stk-742764f{flex:1 1 calc(80% - var(--stk-column-gap,0px) * 2 / 3 ) !important}}</style><div class="stk-column-wrapper stk-block-column__content stk-container stk-742764f-container stk--no-background stk--no-padding"><div class="stk-block-content stk-inner-blocks stk-742764f-inner-blocks"><!-- wp:embed {"url":"https://www.youtube.com/watch?v=xgHOjeiQ7nQ","type":"video","providerNameSlug":"youtube","responsive":true,"className":"wp-embed-aspect-16-9 wp-has-aspect-ratio"} -->
       <figure class="wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio"><div class="wp-block-embed__wrapper">
       https://www.youtube.com/watch?v=xgHOjeiQ7nQ
       </div></figure>
       <!-- /wp:embed --></div></div></div>
       <!-- /wp:stackable/column -->
   
       <!-- wp:stackable/column {"uniqueId":"561a97d","columnWidth":10,"columnAdjacentCount":3,"hideTablet":true,"hideMobile":true} -->
       <div class="wp-block-stackable-column stk-block-column stk-column stk--hide-tablet stk--hide-mobile stk-block stk-561a97d" data-v="4" data-block-id="561a97d"><style>@media screen and (min-width:768px){.stk-561a97d{flex:1 1 calc(10% - var(--stk-column-gap,0px) * 2 / 3 ) !important}}</style><div class="stk-column-wrapper stk-block-column__content stk-container stk-561a97d-container stk--no-background stk--no-padding"><div class="stk-block-content stk-inner-blocks stk-561a97d-inner-blocks"><!-- wp:paragraph -->
       <p></p>
       <!-- /wp:paragraph --></div></div></div>
       <!-- /wp:stackable/column --></div></div>
       <!-- /wp:stackable/columns --></div></div></div>
       <!-- /wp:stackable/column --></div></div>
       <!-- /wp:stackable/columns -->
       ```
   
 * The page I need help with: _[[log in](https://login.wordpress.org/?redirect_to=https%3A%2F%2Fwordpress.org%2Fsupport%2Ftopic%2Fhttps-staging3-smarterbusinessprocesses-com-test%2F%3Foutput_format%3Dmd&locale=en_US)
   to see the link]_

Viewing 5 replies - 1 through 5 (of 5 total)

 *  Plugin Author [BlockMeister](https://wordpress.org/support/users/blockmeister/)
 * (@blockmeister)
 * [2 years, 10 months ago](https://wordpress.org/support/topic/https-staging3-smarterbusinessprocesses-com-test/#post-16927022)
 * Hi Mike,
   I am unable to replicate the issue so far.
 * I installed BlockMeister and Stackable on a fresh local site.
   Added a pattern
   with the code you provided.I was able to edit the pattern again after publishing.
   The dev console showed no errors. I tried several settings too.Regarding the 
   error message, complaining about the failed ‘removeChild’ call, this isn’t a 
   call done by BlockMeister. So I suspect that another plugin is causing this. 
   Please temporary deactivate any other plugins besides BlockMeister and Stackable.
   And try again.
 * If you get the same issue then also deactivate stackable and try again. You will
   now see a message though with the text, you can ignore that:
 * > Your site doesn’t include support for the “stackable/columns” block. You can
   > leave this block intact, convert its content to a Custom HTML block, or remove
   > it entirely.
   > Keep as HTML
 * Regards, Benny
 *  Thread Starter [MikepFive](https://wordpress.org/support/users/mikepfive/)
 * (@mikepfive)
 * [2 years, 10 months ago](https://wordpress.org/support/topic/https-staging3-smarterbusinessprocesses-com-test/#post-16928222)
 * Benny,
 * many thanks for getting back to me so quickly, for time looking into this and
   for your advice. Much appreciated.
 * I disabled all plugins – apart from BlockMeister and Stackable – and attempted
   to edit the Block Pattern, but experienced exactly the same result !
 * So I disabled Stackable and tried again [ I ignored “Your site doesn’t include
   support for the “stackable/columns” block. You can leave this block intact, convert
   its content to a Custom HTML block, or remove it entirely.” and opted to Save
   as HTML
 * This created a CustomHTML block
 * Again, any attempt to edit this block results in same error(s) as before:
 * Error: Failed to execute ‘removeChild’ on ‘Node’: The node to be removed is not
   a child of this node.
   at jr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:75178](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:75178))
   at qr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76430](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76430))
   at Kr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76892](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76892))
   at qr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580))
   at Kr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76892](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76892))
   at qr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580))
   at Kr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76695](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76695))
   at qr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580))
   at Kr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76892](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76892))
   at qr ([https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580](https://staging3.smarterbusinessprocesses.com/wp-includes/js/dist/vendor/react-dom.min.js?ver=18.2.0:10:76580))
 * I have no idea where that leaves us ?
 * Anything else you can suggest that might shed light on what’s going on here ?
 * Or should I simply wipe the staging site & start again from scratch ?
 * ( this would be a pretty unsatisfactory approach. I had hoped that tracking down
   the problem might have shed light on its cause – helping both of us – but I’m
   at a loss here )
 * Might the problem be Theme (Blocksy Pro) related ?
 *  Plugin Author [BlockMeister](https://wordpress.org/support/users/blockmeister/)
 * (@blockmeister)
 * [2 years, 10 months ago](https://wordpress.org/support/topic/https-staging3-smarterbusinessprocesses-com-test/#post-16928622)
 * Mike,
   I tested this again, now with the Blocksy theme activated (the free version
   though) and everything still worked. So I still cannot replicate the issue. Did
   you try to add and edit another pattern, maybe first with just using core blocks?
 * > Or should I simply wipe the staging site & start again from scratch ?
 * An easy and fast option is to test BlockMeister through a free test instances
   on InstaWP, use this link for that: [https://instawp.io/plugins/blockmeister/](https://instawp.io/plugins/blockmeister/)
   
   This will set up a new test site for you, with BlockMeister installed already.
   You may need to activate it though. This way you can test things in isolation.
   I suggest to first replicate your test pattern there and if it goes well add 
   Blocksy and Stackable and see if the issue pops up there too.
 *  Thread Starter [MikepFive](https://wordpress.org/support/users/mikepfive/)
 * (@mikepfive)
 * [2 years, 10 months ago](https://wordpress.org/support/topic/https-staging3-smarterbusinessprocesses-com-test/#post-16929652)
 * Benny,
 * I’ve tested BlockMeister on another site that’s built using Blocksy Pro – without
   a problem!
 * So I went back to [https://staging3.smarterbusinessprocesses.com/](https://staging3.smarterbusinessprocesses.com/)
   and built a Block Pattern from scratch using only core blocks – and it exhibited
   the same errors as before!!!
 * So I deleted and recreated and recreated the staging site, installed BlockMeister
   and tried again – same result – but this time I noticed that the Google Translate
   icon was present in the Chrome address bar, and had detected German which it 
   was translating into English.
 * I selected the icon and selected the option to ‘Never Translate this site’ – 
   and the ‘problem’ seems to have disappeared…
 * I’ve NEVER encountered a ‘translation’ issue whilst editing a page using the 
   WordPress Editor before. It only appeared whilst editing Block Patterns <span
   style=”text-decoration: underline;”>and</span> only on this particular site!!
   So I’ve no idea what might have caused automatic translation to take place – 
   or why this resulted in the error message I’ve been seeing but, for the moment,
   all seems fine.
 * I’ll give BlockMeister a spin on the live site – at least I know what t look 
   for if a similar problem surfaces again 🤕
 * Thanks for your help with this
 * Much Appreciated
 * Mike
 *  Plugin Author [BlockMeister](https://wordpress.org/support/users/blockmeister/)
 * (@blockmeister)
 * [2 years, 10 months ago](https://wordpress.org/support/topic/https-staging3-smarterbusinessprocesses-com-test/#post-16929735)
 * You are welcome!
   I am glad you found the culprit. Kind regards, Benny

Viewing 5 replies - 1 through 5 (of 5 total)

The topic ‘https://staging3.smarterbusinessprocesses.com/test/’ is closed to new
replies.

 * ![](https://ps.w.org/blockmeister/assets/icon-256x256.png?rev=2598699)
 * [BlockMeister - Block Pattern Builder](https://wordpress.org/plugins/blockmeister/)
 * [Frequently Asked Questions](https://wordpress.org/plugins/blockmeister/#faq)
 * [Support Threads](https://wordpress.org/support/plugin/blockmeister/)
 * [Active Topics](https://wordpress.org/support/plugin/blockmeister/active/)
 * [Unresolved Topics](https://wordpress.org/support/plugin/blockmeister/unresolved/)
 * [Reviews](https://wordpress.org/support/plugin/blockmeister/reviews/)

 * 9 replies
 * 2 participants
 * Last reply from: [BlockMeister](https://wordpress.org/support/users/blockmeister/)
 * Last activity: [2 years, 10 months ago](https://wordpress.org/support/topic/https-staging3-smarterbusinessprocesses-com-test/#post-16929735)
 * Status: resolved