| With many Mathews solocam bows, you will notice that the cam has two holes on opposite sides. For the best timing position, the line that passes through these holes should be parallel with the bow string. On some newer cams, they apparently drilled a hole in which the cable should cut through the center as seen on the Reezen's cam. (lower right) A quick way of checking parallel orientation is by taking an arrow and placing it over the cam. With one eye closed, cut the center of the two small holes with an arrow and visually see if the arrow is parallel to the bowstring. If the trajectory is way off, you may have to adjust the cam. If you are having a hard time telling if its perfectly parallel, its probably close enough. |
 |
