Forum Replies Created

Viewing 15 replies - 1 through 15 (of 24 total)
  • extremeleadprogramcom

    (@extremeleadprogramcom)

    I am having this exact same issue and have tried to change every setting in the plugin. Works fine for normal user logins without Wordfence 2FA but my admin and VA’s shop manager login with 2FA enabled experience the same issue as the OP.

    Here are my debug logs if that helps:

    December 18, 2025 3:35 pm No timeout-or-duplicate IP: x
    URL: /wp-login.php
    December 18, 2025 3:35 pm Yes Success IP: x
    URL: /wp-admin/admin-ajax.php

    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    The plugin was FlyingPress. However, it only happened when I turned on the “Throttle Heartbeat API” feature.

    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    Thanks for the reply. I turned on a “Throttle Heartbeat API” feature in another plugin. That seemed to cause the conflict/issue.

    I turned that back off and now all seems fine again!

    extremeleadprogramcom

    (@extremeleadprogramcom)

    I use the plugin with PHP 8.1.27 and have no issues like that at all.

    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    Got it, installed it, and this does appear to indeed fix the issue, thanks.

    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    Done, I’ll give this a try, thanks.

    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    Rolling back to V2.5.9.3 does NOT fix the issue.

    Looking at my logs, here is everything else I updated when I upgraded:

    WordPress 6.3 – 6.3.1
    All in One SEO 4.4.4 – 4.4.5.1
    AutomateWoo 6.0.2 – 6.0.3
    Kadence Blocks – PRO Extension 2.0.11 – 2.0.12
    Post SMTP 2.5.9.3 – 2.5.9.4
    Spectra 2.7.6 – 2.7.7
    WooCommerce 8.0.2 – 8.0.3

    After disabling the “All in One SEO” plugin the issue seems to go away so it seems like this would be on their end. I’ll post to them, thanks.

    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    Sure here you go:

    Mailer: postsmtp
    HostName: xndur02esu-staging.wpdns.site
    cURL Version: 7.87.0
    OpenSSL Version: OpenSSL/1.1.1p
    OS: Linux ash17.onrocket.com 4.18.0-477.13.1.lve.el8.x86_64 #1 SMP Thu Jun 1 16:40:47 EDT 2023 x86_64
    PHP: Linux 8.1.22 C.UTF-8
    PHP Dependencies: iconv=Yes, spl_autoload=Yes, openssl=Yes, sockets=Yes, allow_url_fopen=Yes, mcrypt=No, zlib_encode=Yes
    WordPress: 6.3.1 en_US UTF-8
    WordPress Theme: Kadence Child
    WordPress Plugins: Advanced Custom Fields, Affiliates Enterprise, Affiliates WooCommerce Integration, All in One SEO, AutomateWoo, Blog2Social: Social Media Auto Post & Scheduler, PublishPress Capabilities, CartFlows Pro, CartFlows, Code Snippets, Custom Order Status for WooCommerce, Yoast Duplicate Post, Enable Media Replace, Head, Footer and Post Injections, Imagify, Itthinx Updates, Kadence Blocks - PRO Extension, Kadence Blocks – Gutenberg Blocks for Page Builder Features, Kadence Cloud, Kadence Custom Fonts, Kadence Pro - Premium addon for the Kadence Theme, Kadence Reading Time, Kadence Starter Templates, Kadence Shop Kit, Metricool, Modern Cart for WooCommerce, Post SMTP, ProveSource, Sticky Block, SupportCandy, Temporary Login Without Password, TrueROAS, Spectra, Ultimate Blocks, UpdraftPlus - Backup/Restore, User Switching, Verfacto, WooCommerce Stripe Gateway, PDF Invoices & Packing Slips for WooCommerce, Sequential Order Numbers for WooCommerce, WooCommerce Subscriptions, WooCommerce, Wordfence Security, SupportCandy - Automatic close tickets, SupportCandy - Canned Reply, SupportCandy - Satisfaction Survey, SupportCandy - WooCommerce
    WordPress wp_mail Owner: /home/xnduree/public_html/xndur02esu-staging.wpdns.site/wp-content/plugins/post-smtp/Postman/PostmanWpMailBinder.php
    WordPress wp_mail Filter(s): wp_staticize_emoji_for_email, WPO\WC\PDF_Invoices\Main->set_phpmailer_validator, PostsmtpMailer->get_mail_args
    WordPress wp_mail_from Filter(s): wordfence::fixWPMailFromAddress
    WordPress phpmailer_init Action(s): PostsmtpMailer->phpmailer_smtp_init
    Postman: 2.5.9.4
    Postman Sender Domain (Envelope|Message): extremeleadprogram.com | extremeleadprogram.com
    Postman Prevent Message Sender Override (Email|Name): Yes | Yes
    Postman Active Transport: SMTP (smtp:tls:plain://email-smtp.us-east-2.amazonaws.com:587)
    Postman Active Transport Status (Ready|Connected): Yes | Yes
    Postman Deliveries (Success|Fail): 379334 | 3424
    Postman TCP Timeout (Connection|Read): 15 | 60
    Postman Email Log (Enabled|Limit|Transcript Size): Yes | 500 | 512
    Postman Run Mode: log_only
    Postman Stealth Mode: Yes
    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    This is a staging server. There isn’t really any traffic or anything to monitor at all over time.

    It only seems to make sense to monitor it while I’m actually doing things in the backend or running a test load?

    Is there nothing simple to check in the configs or what I provided that would clue us in to an issue?

    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    This is a bare metal server with no major support so I am on my own for the most part here.

    I found some helpful pages searching google… here is a test run with some commands running on the server: https://nimb.ws/H0v3ye

    Here is the output of the info command when this is all done:

    # Server
    redis_version:3.2.12
    redis_git_sha1:00000000
    redis_git_dirty:0
    redis_build_id:7897e7d0e13773f
    redis_mode:standalone
    os:Linux 3.10.0-1127.13.1.el7.x86_64 x86_64
    arch_bits:64
    multiplexing_api:epoll
    gcc_version:4.8.5
    process_id:1373
    run_id:2f258f78b586e4d97d42d399704dd01308b8df8a
    tcp_port:6379
    uptime_in_seconds:2576833
    uptime_in_days:29
    hz:10
    lru_clock:8805063
    executable:/usr/bin/redis-server
    config_file:/etc/redis.conf

    # Clients
    connected_clients:1
    client_longest_output_list:0
    client_biggest_input_buf:0
    blocked_clients:0

    # Memory
    used_memory:4730608
    used_memory_human:4.51M
    used_memory_rss:10207232
    used_memory_rss_human:9.73M
    used_memory_peak:223054352
    used_memory_peak_human:212.72M
    total_system_memory:50465189888
    total_system_memory_human:47.00G
    used_memory_lua:37888
    used_memory_lua_human:37.00K
    maxmemory:268435456
    maxmemory_human:256.00M
    maxmemory_policy:allkeys-lru
    mem_fragmentation_ratio:2.16
    mem_allocator:jemalloc-3.6.0

    # Persistence
    loading:0
    rdb_changes_since_last_save:141486
    rdb_bgsave_in_progress:0
    rdb_last_save_time:1650395398
    rdb_last_bgsave_status:ok
    rdb_last_bgsave_time_sec:-1
    rdb_current_bgsave_time_sec:-1
    aof_enabled:0
    aof_rewrite_in_progress:0
    aof_rewrite_scheduled:0
    aof_last_rewrite_time_sec:-1
    aof_current_rewrite_time_sec:-1
    aof_last_bgrewrite_status:ok
    aof_last_write_status:ok

    # Stats
    total_connections_received:6704
    total_commands_processed:715918
    instantaneous_ops_per_sec:0
    total_net_input_bytes:30046973656
    total_net_output_bytes:34998383404
    instantaneous_input_kbps:0.00
    instantaneous_output_kbps:0.00
    rejected_connections:0
    sync_full:0
    sync_partial_ok:0
    sync_partial_err:0
    expired_keys:443
    evicted_keys:0
    keyspace_hits:472173
    keyspace_misses:74804
    pubsub_channels:0
    pubsub_patterns:0
    latest_fork_usec:0
    migrate_cached_sockets:0

    # Replication
    role:master
    connected_slaves:0
    master_repl_offset:0
    repl_backlog_active:0
    repl_backlog_size:1048576
    repl_backlog_first_byte_offset:0
    repl_backlog_histlen:0

    # CPU
    used_cpu_sys:1114.31
    used_cpu_user:446.39
    used_cpu_sys_children:0.00
    used_cpu_user_children:0.00

    # Cluster
    cluster_enabled:0

    # Keyspace
    db0:keys=3200,expires=199,avg_ttl=346706741

    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    How do I do that?

    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    Afer I let it sit and run through it again here are the metrics: https://nimb.ws/5uAoia

    Much slower it seems. These numbers are more indicative of what I noticed previously.

    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    A little background on the server. The Redis server is on the same server as the Apache server. It is a dedicated server on a 24 core, Intel(R) Xeon(R) CPU X5670 @ 2.93GHz with 48GB of Ram.

    It’s running ISPconfig and I have a dozen or so low traffic sites and my 1 main mid traffic site. The server typically runs at a very low load.

    I am testing this on the staging site on the same server so the only load I can do is just go through the back end several times and show you metrics.

    Here is a 5-minute video of me doing just that while including the server stats via the TOP command: https://nimb.ws/XBDtQH

    I go to the Redis metrics a couple of times in the video but here is a quick screenshot of those: https://nimb.ws/7QrCWF

    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    Will do that.

    I think this may have actually been my mistake when I reset my browser settings…

    Thread Starter extremeleadprogramcom

    (@extremeleadprogramcom)

    I put the option back and subscribed a new browser.

    I sent a notification but ONLY that new browser got it, the old 2 did not… that means NONE of my original subscribers are getting anything, what happened???

Viewing 15 replies - 1 through 15 (of 24 total)