Postie plugin stopped recognizing valid users

  • Resolved sstowell

    (@sstowell)


    9 years, 7 months ago

    Emails to postie mail account used to work, but now it fails to recognize & parse the email headers with the following notification in the subject line:
    Corvidae Press: Unauthorized Post Attempt from
    No “from” content in the above & debug shows: Postie [debug]: No ‘from’ header found

    I tried this: Deactivated then Uninstalled Postie. But when I reinstalled Postie, all the settings were already configured so … this may not have cleared up any problems there. Still fails.

Viewing 15 replies - 1 through 15 (of 26 total)
1 2
  • Plugin Author Wayne Allen

    (@wayneallen-1)

    9 years, 7 months ago

    Please try switching “Connection” to “Sockets”.

    If that doesn’t work try switching “Mail Protocol” to IMAP-SSL. If you change “Mail Protocol” you will also need to change the port.

    Thread Starter sstowell

    (@sstowell)

    9 years, 7 months ago

    These settings fail to connect with the mail server when I test the config. The only combination that connects is POP3 with port 110.

    Note the failure started before the lasted update of Postie…

    • This reply was modified 9 years, 7 months ago by sstowell.
    Plugin Author Wayne Allen

    (@wayneallen-1)

    9 years, 7 months ago

    Are you using Sockets or cURL for the Connection setting?

    pesce

    (@pesce)

    9 years, 7 months ago

    I believe the OP is connecting just fine… the problem is in the parsing… otherwise, there wouldn’t be an email to check!

    I am having the same exact issue… connects, downloads the emails and errors out with no “from” in header… although there is a from and the postie debug shows it.

    I am using curl

    • This reply was modified 9 years, 7 months ago by pesce.
    • This reply was modified 9 years, 7 months ago by pesce.
    Thread Starter sstowell

    (@sstowell)

    9 years, 7 months ago

    Yes, cURL is my setting. I tried sockets but the TEST CONFIG fails with sockets, TEST CONFIG also fails with POP3-SSL & port 993.
    TEST CONFIG connects/succeeds with POP3 & CURL, and postie reliably detects the email I send to the Postie email address.
    ValidatePoster: post postie_filter_email3
    Invalid sender: ! Not adding email!
    MailToRecipients: send mail
    MailToRecipients: return to sender 1

    To: [email protected]

    From: =?utf-8?b?Q29ydmlkYWUgUHJlc3M=?= <[email protected]>
    MailToRecipients: sending reject mail
    Warning: array_key_exists() expects parameter 2 to be array, null given in /home/ptartist/public_html/corvidaepress.com/wp/wp-content/plugins/postie/postie-functions.php on line 1788

    Warning: array_key_exists() expects parameter 2 to be array, null given in /home/ptartist/public_html/corvidaepress.com/wp/wp-content/plugins/postie/postie-functions.php on line 1791

    Warning: array_key_exists() expects parameter 2 to be array, null given in /home/ptartist/public_html/corvidaepress.com/wp/wp-content/plugins/postie/postie-functions.php on line 1794

    Warning: First parameter must either be an object or the name of an existing class in /home/ptartist/public_html/corvidaepress.com/wp/wp-content/plugins/postie/postie-functions.php on line 1798

    A copy of the message has been forwarded to the administrator.
    Ignoring email – not authorized.
    Mail fetch complete, 1 emails
    memory at end of email processing:32277016

    (note that I do NOT get a copy of the email with the error, only an empty email with this error message in the Subject line: Corvidae Press: Unauthorized Post Attempt from )

    • This reply was modified 9 years, 7 months ago by sstowell.
    pesce

    (@pesce)

    9 years, 7 months ago

    Yes exactly my problem.

    The part that is probably making it fail is in bold

    From: =?utf-8?b?Q29ydmlkYWUgUHJlc3M=?= <[email protected]>

    Plugin Author Wayne Allen

    (@wayneallen-1)

    9 years, 7 months ago

    There appears to be some difference in the cURL versions. Please let me know what version of cURL you have.

    To see the version click the debug button. You should see something like:

    
Starting mail fetch
Postie Version: 1.8.5
Wordpress Version: 4.6.1
PHP Version: 7.0.10
OS: Windows NT WALLEN 6.2 build 9200 (Windows 8 Professional Edition) i586
POSTIE_DEBUG: On
Time: 2016-10-19 15:46:40 GMT
Error log: C:/Windows/Temp/php7_errors.log
TMP dir: C:\Windows\TEMP/
Postie is in D:\source\Postie\wp35\wp-content\plugins\postie/
cURL version: 7.49.1
    Thread Starter sstowell

    (@sstowell)

    9 years, 7 months ago

    Note older PHP version. Not sure if the cURL version is here in the version_number array value, or is missing, but here is the start of the debug output:

    postiePostie Settings (v1.8.5)
    Starting mail fetch
    Postie Version: 1.8.5
    Wordpress Version: 4.6.1
    PHP Version: 5.6.27
    OS: Linux siteground212.com 3.12.18-clouder0 #6 SMP Thu Sep 15 14:00:54 EEST 2016 x86_64
    POSTIE_DEBUG: On
    Time: 2016-10-19 15:54:22 GMT
    Error log: php_errorlog
    TMP dir: /tmp/
    Postie is in /home/ptartist/public_html/corvidaepress.com/wp/wp-content/plugins/postie/
    Cron: On
    Alternate Cron: Off
    wp_content_path: /home/ptartist/public_html/corvidaepress.com/wp/wp-content
    postie_getemails: Connecting to mail.ptartist.com:110 (pop3)
    Connecting via cURL
    Array
    (
    [version_number] => 471555
    [age] => 3
    [features] => 640541
    [ssl_version_number] => 0
    [version] => 7.50.3
    [host] => x86_64-pc-linux-gnu
    [ssl_version] => OpenSSL/1.0.2j
    [libz_version] => 1.2.3
    [protocols] => Array
    (
    [0] => dict

    • This reply was modified 9 years, 7 months ago by sstowell.
    Thread Starter sstowell

    (@sstowell)

    9 years, 7 months ago

    FYI: requested & got updated to PHP7, but that does not change the Postie problem.

    Plugin Author Wayne Allen

    (@wayneallen-1)

    9 years, 7 months ago

    @sstowell yes, seems to be something with cURL 7.50.3.

    Can you switch to sockets now that you’re on PHP 7?

    pesce

    (@pesce)

    9 years, 7 months ago

    My host does not support sockets unfortunately.

    Thread Starter sstowell

    (@sstowell)

    9 years, 7 months ago

    Pretty sure that Sockets are not supported on SiteGround based on previous Chat, but I will verify.

    Can I uninstall and get an older version of Postie?

    Plugin Author Wayne Allen

    (@wayneallen-1)

    9 years, 7 months ago

    Yes, you can get the previous version here: https://downloads.wp.xz.cn/plugin/postie.1.7.32.zip

    pesce

    (@pesce)

    9 years, 7 months ago

    is there a way to export current settings?

    Thread Starter sstowell

    (@sstowell)

    9 years, 7 months ago

    I’ll try this previous version: thank you.

Viewing 15 replies - 1 through 15 (of 26 total)
1 2

The topic ‘Postie plugin stopped recognizing valid users’ is closed to new replies.