Forum Replies Created

Viewing 12 replies - 1 through 12 (of 12 total)
  • Thread Starter leo1951

    (@leo1951)

    Adam Dunnage Thank you for responding. While reviewing your reply, some thoughts came to mind, and I went over the config and realized I did not install the site with the correct settings.

    All, is now OK.

    Thanks, Fred

    Thread Starter leo1951

    (@leo1951)

    The solution is with Nginx.

    In your Nginx open config # sudo nano /etc/nginx/conf.d/xxxxxxx.conf and change the line in location / {
    try_files $uri $uri/ /index.php; [to:] try_files $uri $uri/ /index.php$is_args$args;
    check for error >$sudo nginx -t
    If al OK reload Nginx: >$sudo systemctl reload Nginx.

    The issue is not with the plugin, but it an Nginx/WordPress problem. Other issues show up in some WordPress installation when editing a post, and this is also the fix.

    Thread Starter leo1951

    (@leo1951)

    Thanks very.

    As I start to troubleshoot on two sites running WordPress 5-71 with PHP 7.4, never install the plugin before, I get the error, `Warning: include(/usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/includes/vendor/composer/autoload_classmap.php): failed to open stream: No such file or directory in /usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/includes/loader.php on line 26

    Warning: include(): Failed opening ‘/usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/includes/vendor/composer/autoload_classmap.php’ for inclusion (include_path=’.:/usr/share/php’) in /usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/includes/loader.php on line 26

    Warning: include(/usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/third-party/vendor/composer/autoload_classmap.php): failed to open stream: No such file or directory in /usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/includes/loader.php on line 28

    Warning: include(): Failed opening ‘/usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/third-party/vendor/composer/autoload_classmap.php’ for inclusion (include_path=’.:/usr/share/php’) in /usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/includes/loader.php on line 28

    Warning: array_merge(): Expected parameter 1 to be an array, bool given in /usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/includes/loader.php on line 28

    Warning: require(/usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/third-party/vendor/autoload_files.php): failed to open stream: No such file or directory in /usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/includes/loader.php on line 53

    Fatal error: require(): Failed opening required ‘/usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/third-party/vendor/autoload_files.php’ (include_path=’.:/usr/share/php’) in /usr/share/nginx/html/wp-content/plugins/site-kit-wp-1.25.0/includes/loader.php on line 53`.

    I started with version 1.21 and working my way up on the two sites. However, it’s late, and I must go to bed. I will continue tomorrow. I disable auto-update on WordPress.

    Please leave the ticket open. I will complete the progress and will not update on still I end the progress.

    Thread Starter leo1951

    (@leo1951)

    Hello James, if “plugin here” meant to be a link, then you missed pasting the link.

    I will first install the plugging on a fresh installation and on an old installing that never had the plugin.

    I will share the fix if I come up with one.

    Thread Starter leo1951

    (@leo1951)

    Thanks for responding. You seem to be making an observation that could be causing the problem. All of my sites are using the same configuration of Nginx. The fresh installation of the plugin is having a problem, whereas the old installations are working. I want to run some tests if I can have an old version of Site Kit like 1.25.0. The upgrade of the plugin is fine where I installed it some time back. It is a new installation that I see the problem with.

    Where Site Kit was

    search_console_property: https://www.multimixradio.com/
    adsense_account_id: none
    adsense_client_id: none
    adsense_account_status: none
    adsense_use_snippet: yes
    adsense_web_stories_adunit_id: none
    analytics_account_id: 1472•••
    analytics_property_id: UA-1472••••••
    analytics_profile_id: 3614••••
    analytics_use_snippet: yes
    tagmanager_account_id: none
    tagmanager_container_id: none
    tagmanager_amp_container_id: none
    tagmanager_use_snippet: yes
    Thread Starter leo1951

    (@leo1951)

    Wayne, you are truly the best. I would never have thought of that being the problem.

    My home country, Dominica was recently devastated my Hurricane Maria, and a friend sent be lots of images in an attachment and I just forward the email as I always do never felt that would be an issue with Postie.

    Thanks again so much.

    Fred

    • This reply was modified 8 years, 7 months ago by leo1951.
    Thread Starter leo1951

    (@leo1951)

    Thanks for the response, Wayne.

    It just stays there forever as if trying to load.

    Thread Starter leo1951

    (@leo1951)

    Hello, I just visited a site using the theme and realize that the Continue Reading don’t appear on the frontpage (sorry).

    Is there a way to get it show on the Homepage?

    Fred

    Thread Starter leo1951

    (@leo1951)

    Hello Frank,

    I am back working on the Quiz Master Next and notice that when I access the quizzes from a category link I see three “Next” and “Previous” buttons.

    http://quizblogs.cakafete.com/?cat=14

    Thanks

    Fred

    Thread Starter leo1951

    (@leo1951)

    Hello Frank,

    Sorry to be a pain in the butt it seems that some variables are not producing the output test but instead the variables, or I am entering them in the wrong place.

    Here is another that I am experimenting with “Correct Answer Info:” and the variable %CORRECT_ANSWER_INFO%.

    The variable is what I see an not the text entered.

    Thanks

    Fred

    Thread Starter leo1951

    (@leo1951)

    Hello Frank,

    I am still in the testing stages of the quiz and only have one landing page at the moment but I think that I have mislead you.

    I see this result as a login user.

    I set a time limit for the quiz and in “Quiz Text” in the section I enter the below.

    Message Displayed If User Has Tried Quiz Too Many Times
    Allowed Variables:
    – %QUIZ_NAME%
    – %CURRENT_DATE%

    as a result I get that message.

    Thanks

    Thread Starter leo1951

    (@leo1951)

    Frank Many Thanks.

    I am very, very new to WordPress and is very happy that I have decided to start using it as I rebuild couple of my sites.

    Why my first post redirected elsewhere I have no clue and for this I had to repost.

    Having a quiz again would be a nice feature and from reading your forum I think that I will most likely be supporting your efforts.

    I love good customer service.

    Here is another feature you might want to think about if it is not already on your list is the ability to have the option to post the results to twitter and facebook.

    Thanks

    Fred

Viewing 12 replies - 1 through 12 (of 12 total)