Paul Vek

Yes, Our site is active, has visitors and sales.

thanks @doublezed2

I explained my concerns about reactivating it. Is there any problem if I reactivate it?
Now I have kept HPOS and compatibility enabled again, right?
How many days should this state be maintained and after how many days should I remove the compatibility check? (disable) and only HPOS remains active? And then it’s over?

Hello @doublezed2 thank you for your response

I didn’t keep it active for long time maybe 6 hours. I had read the instructions you sent. But when I felt the process was complete and the high performance activation option was enabled I enabled it and disabled the compatibility option.

I don’t think there is anything wrong with my method. I feel you should have considered a better mechanism for HPOS. After all this time, it is still a big challenge to transition to it.

However, I got those errors but I’m still using the new feature, if there’s any problem, I’m afraid to go back to the previous state in case there’s a problem with the data.

I went to take a look at that section, to my surprise I saw a few tables waiting to be synced. I had done it once. And I had kept the HPOS mode active, however, it seems that there are still things in the process waiting for the command to execute and synchronize. I don’t know, maybe this is not needed and there is no need for this work, and this is for the opposite mode, that is, instead of transferring to the orders table, it transfers from the orders table to the posts table.

https://i.imgur.com/eWowHFu.png

HPOS is a good feature, but even for me, who knows about WordPress development and has a hand in programming to some extent, this process is boring, uncertain, and daunting!

بسیارخب

مثلا زمانی که یک محصول رو به سبد اضافه میکنیم نام محصول رو مینوسه همراه با

has been added to your cart

یا لغو سفارش به صورت

cancel order

و … اما با کمال تعجب در نسخه ووکامرس 8.5.2 فعلا دارم این موارد رو نمیبینم

ولی برخی مشکلات دیگر پلاگین مثل ترجمه نامناسب برخی کلمات و جملات و کار نکردن حلقه های ترجمه و عدم امکان تغییر در فایل های زبان و دستیابی به ترجمه دلخواه چیزهائیه که خیلی وقته گزارش شده و ممنون میشم رسیدگی کنید

من تواما وقتی این مشکلات رو دیدم که هم پلاگین آپدیت شده بود و هم جهت دستیابی به ترجمه دلخواه فایل های زبان رو ویرایش کردم ولی بعد از اون حتی با جایگزینی نسخه پلاگین به رسمی و حتی نسخه ای که از پرشین اسکریپت فرستادید و تست و بررسی هر مورد دیگر هم باز درست نشد.

از طرفی کار نکردن حلقه های ترجمه از طرفی سلیقه های مختلف در جمله بندی که مورد نیاز افراد مختلف و کسب و کارهای با مدل های مختلفه و همچنین بهم خوردن ترجمه و بروز مشکلات جدید در صورتی تغییر در فایل های ترجمه افزونه باعث میشه که از هر سمت و سو دستمون بسته باشه

طوریه که وقتی در فایل ترجمه تغییر ایجاد میشه یا به همون ترجمه قبلی برمیگرده یا اینکه به دلیل مغایرت نسخه اصلی در مخزن و نسخه ای که در هاست وجود داره تعداد همون فایل های جیسون بیشتر بشه همچنین برخی مشکلات بوجود بیاد. یا بهتره این مشکلات حل بشه و امکان ویرایش و جایگزینی دستی فایل های زبان وجود داشته باشه یا اینکه دست کم بخش حلقه های ترجمه مانند قبل درست بشه تا از اونجا بشه تغییرات دلخواه رو بدون ویرایش و دستکاری فایل اصلی تغییر داد

ولی اگه بخش حلقه های ترجمه روی پرفرمنس اصلی افزونه و کارکرد سایت تاثیر میذاره و کوئری های سنگین ایجاد میکنه. یا سایر کدها به زبان های مختلف فورس میشه. این باعث میشه که ارزشش رو نداشته باشه و در صورتی که سرعت سایت رو پایین بیاره و مشکلات و درگیری های مختلف بوجود بیاره اگه کلا از پلاگین حذف بشه بهتره چون همین الان هم مدت هاست کار نمیکنه اما همچنان در پلاگین وجود داره

به هر حال متشکرم از شماو هرچند خیلی دیر پاسخ دادید به هر حال یک تاپیک دیگر رو در زیر لینک میکنم میتونید مشاهده بفرمایید در مورد فرمت استاندارد فایل زبان و…. موفق باشید

https://ww.wp.xz.cn/support/topic/%d8%af%d8%b1-%d9%86%d8%b3%d8%ae%d9%87-%d9%87%d8%a7%db%8c-%d8%a7%d8%ae%db%8c%d8%b1-%d9%81%d8%a7%db%8c%d9%84%db%8c-%d9%87%d8%a7%db%8c-%d8%aa%d8%b1%d8%ac%d9%85%d9%87-%da%a9%d8%a7%d8%b1-%d9%86%d9%85%db%8c/

Thanks again a lot @shameemreza You can mark this as solved.
It seems that the problem occurred in 2 different situations.
The first is that the order was placed when WooCommerce was version 8.4. And when we changed the order to Canceled, the WooCommerce version was 8.5.2! That is, order registration was in 8.4 and the change to cancel was made in version 8.5.2!
The second possibility is perhaps more likely. There are problems with hosting and site servers. Our server may have experienced problems. Anyway, we didn’t understand exactly what the problem was! But it seems that there is no problem now, although we finally did not find the reason.

Hi mircea and thanks for your response

but there is no such option in the settings. There is actually an option in the settings to set the default size.

There is another option called auto, if it is active, the size (height) of the editor will be the size of all lines of code. If it is 1000 lines, we will have a long very long editor without the ability to change the size, which is not beautiful for many codes, and it is possible. Make it a little harder.

But the code I posted adds flexibility. Everyone can set whatever size they like while typing. This can also be in the form of a new option in the plugin settings, such as setting the default height and setting it automatically.

Thank you sir for your kindness @rokmeglic

but this number not just only billing phone feild

It exists in other places like billing, order review, order edit, users, factors (i mean invoices), emails and more

That’s why I say it should be solved by the programmers and developers of WooCommerce itself. Because this is being produced and called from the source. It is better to stop there (change).

Here, we have only changed the billing phone on the payment page and written a code for it. This can also affect the performance of the site, even if it is PHP. Because these terms cancel the default and previous terms of WooCommerce. A conflict is taking place to win our code!

But as I gave an example. It still remains in many places. Maybe many places remain hidden from our view and they also need to change. If we want to write a code for each of those places, it requires expertise and a lot of time. It is not suitable for people who are not experts.

Thank you very much for your help. Your codes worked (of course the first code didn’t work) although I was able to fix it myself.

But AI codes are often not good enough either. They have flaws. Or they are not optimal and should be changed. You must be a programmer and check because sometimes they may even damage the database. And it requires caution and knowledge. Otherwise, anyone can generate an answer with artificial intelligence and use it.

@daneshh No, I do not use any plugins. These items have been fully tested by a WordPress and WooCommerce raw, the problem is from WooCommerce. It is not a matter of interference or using another plugin.