Michael
Forum Replies Created
-
@moderator
Sorry, did not know this … and will follow this rule.Hi @htmgarcia
I fully understand your general position – free to use basic version, but subscription for additional features and support. And I support this – some plugins I use free, and where I need pro features, I pay subscription.
Helping to find problems … I regard this as a separate issue.
But – I appreciate your support here, and will continue to help.Regarding the proposed tests:
- MetaSlider 3.100.4: no change, 10-12 sec load time.
I kept 3.100.4 installed and
- Deactivated MetaSlider Lightbox –> no change, still 10-12 sec.
- Deactivated all other plugins, except MetaSlider 3.100.4 –> approx. 8 sec load time
Question: With 3.99.0 installed, which MetaSlider Lightbox shall I use ?
–> I see no difference between 2.0.0, 2.0.1, 2.0.2 … and have 2.0.2 installed.Thank you.
Dear @stevejburge
Hmmm – this is strange.
I am helping you, to debug your software. Kind of surprising that you are not interested to solve the problem.
Sad.With this 3.100.3 (and MetaSlider Lightbox) it’s still in the 10-15 sec loading time.
So no improvement.
3.99 and earlier versions are below 1 sec.The above link results in “Not found”.
Hi @rochdesigns
I installed the updated version MetaSlider Lightbox 2.02, and updated MetaSlider to 3.100.1
==> Same, it takes 10-11 sec to open a page.Rolled back to MetaSlider 3.99, keeping MetaSlider Lightbox 2.02 ==> instant open.
I deactivated Firelight Lightbox, set the options in Metaslider Lightbox to open for images, galleries and videos.
Exact same timing: It takes 10 sec to 1+ minute to open a page.
But some strange behaviour:
- The Metasliders show now a button “open in lightbox”.
This opens the (small) preview image, not the full image.
There is additionally a hyperlink on the sliders –> but this opens the full image in a new tab. Not lightbox. - The large aaa-sidebar-1 slider does show lightbox hyperlink. Not the button “open in lightbox”
But, it opens also in a new tab, not in lightbox. - Videos do not open in lightbox – also in new tab. See here, video is in the image top right.
- What is working with your lightbox: Envira galleries and single images. There is a hyperlink, and lightbox opens the full size image.
I tried to revert to 3.99 –> same behaviour, Metaslider Lightbox not working properly.
I checked in 3.99 again with Firelight Pro –> working properly: Fast page opening, Metasliders, Envira galleries, Video, and the big sidebar Metaslider … all working properly.
I left my site again in 3.100.1, Firelight Pro deactivate, Metaslider Lightbox active.
Best regards.
MichaelAddendum:
- On other sides, it takes much longer to open, in the minute range
- And, it seems that creating the slider code takes even longer – after 5 min, the lightbox-hyperlink was still not there.
I can leave only for a short time this slow version – please let me know, whether you need my site with 3.100.1 – and if, how long.
Thank you.
Hi Steve @stevejburge
This page https://www.familie-becker-feldmann.de/kalifornien-2002/ has
- on the left side the slider “aaa-sidebar-1”, with 209 images. This slider is my “best of photographs”, and is on each page of the website.
- on the upper right a small slider with only 8 images.
With 3.99 I have the following timings:
- Opening https://www.familie-becker-feldmann.de/kalifornien-2002/ –> instantaneous. With or without clearing the browser cache.
- Opening in WordPress the slider aaa-sidebar-1 takes approx. 25 sec. I takes a while, until the images and texts can be edited. Note: In some versions prior to 3.99, this opening for edit took painful several minutes. I went for a coffee …
With 3.100.1, the pages opens in approx. 10 sec. With empty browser cache as well as when all 209 images are in browser cache.
Open for edit takes 32 sec. So a bit slower, but not the several minutes as in some older versions.Some other hints:
- I have a relatively fast internet connection, 50 MBit. But also in my office, with 4 GBit, it’s that slow.
- In total, I have 1064 Metasliders. So a lot.
- There is a glitch: For aaa-siderbar-1,
– Metaslider shows in WordPress 123 slides (see screenshot 1)
– but in reality, there are 209 slides (screenshot 2)
I checked and counted: There are 209 images, all I can edit. - I left my website on 3.100.1
Hope this helps, looking forward to getting feedback.
Best regards.
MichaelPS: I just notice that I cannot add screenshots. If you need those, I need to email.
- This reply was modified 10 months ago by Michael.
Addendum: Rollback to Metaslider 3.99, but still Metaslider Lightbox 2.0.1
==> Hyperlink for Firelight Pro working
==> But page build-up speedy, no complain.For the moment, I stick with this combination, until performance is repaired.
Thank you.
Dear @rochdesigns
Thank you for the quick response.
The fix works – with Metaslider 3.100.1 and Metaslider Lightbox 2.0.1 (your linked version) the hyperlinks are there, Firelight Pro opens.What is still the case: Page build-up is awfully slow, compared to Metaslider 3.99
Best regards.
Michael- This reply was modified 10 months ago by Michael.
(Typo above: 4.000.1 is the Metaslider version)
I rolled back Metaslider to 3.99 and Metaslider Lightbox to 1.13.4
–> Everything is working !Then updated Metaslider to 4.100.1, but left Metaslider Lightbox on 1.13.4
–> Still working
–> But: Page build-up has become very slow. Extremely, not acceptable.With update of Metaslider Lightbox to 2.0.0
–> No working.I rolled back to 3.99 and 1.13.4, the last versions woking properly.
Hi @firelightwp
Great :-)))
I updated to 2.3.2 and everything is fine now.
G r e a t support. Thank you!Best regards.
MichaelHi @firelightwp
- Yes, sorry – my reply is unrelated to the original “escape key” post.
I do not know how to repair/change this. - Oh – yes, I have the Easy Fancybox Pro extension, version 1.8.1
It’s activated.
Do I still need it? Shall I try to deactivate?
In the FirelightWP settings I find:
– Easy Fancybox General Settings
– Choose Lighbox Version –> FancyBox Legacy
Any hints/tipps welcome.
The version 2.3.1 has created a severe error on my website – WordPress only grants access in recovery mode.
The error message is:Fehler-Details
==============
Ein Fehler vom Typ E_ERROR wurde in der Zeile 64 der Datei /www/htdocs/felbec/new/wp-content/plugins/easy-fancybox/inc/class-easyfancybox-admin.php verursacht. Fehlermeldung: Uncaught Error: Call to undefined method easyFancyBox_Advanced::has_valid_license() in /www/htdocs/felbec/new/wp-content/plugins/easy-fancybox/inc/class-easyfancybox-admin.php:64
Stack trace:
#0 /www/htdocs/felbec/new/wp-content/plugins/easy-fancybox/easy-fancybox.php(60): easyFancyBox_Admin->__construct()
#1 /www/htdocs/felbec/new/wp-settings.php(522): include_once(‘/www/htdocs/fel…’)
#2 /www/htdocs/felbec/new/wp-config.php(114): require_once(‘/www/htdocs/fel…’)
#3 /www/htdocs/felbec/new/wp-load.php(50): require_once(‘/www/htdocs/fel…’)
#4 /www/htdocs/felbec/new/wp-admin/admin.php(34): require_once(‘/www/htdocs/fel…’)
#5 /www/htdocs/felbec/new/wp-admin/index.php(10): require_once(‘/www/htdocs/fel…’)
#6 {main}
thrownI needed to roll back to 2.2.10, my website is now working properly. (Roll back to 2.3.0 did not help)